Lee Precision Value 4 Hole Turret Press Kit

This kit includes the Lee 4 Hole Turret Press which features a proven design that utilizes turrets locked into a solid steel ring to make changing calibers quick and easy. The powerful linkage allows even the largest magnum cases to be sized with minimal effort. The kit also includes a Lee Auto Drum Powder Measure, Lee Safety Scale, Lee Primer Pocket Cleaner, Cutter & Lock Stud and Chamfer Tool.

With the Lee Precision Deluxe 4-Hole Turret Press Kit you can produce a finished round with just four pulls of the lever. With a little experience, most reloaders find they can load over 200 rounds per hour using the 4-Hole Turret Press. Order a set of Pistol Dies or Rifle Dies and a Case Length Gauge for your caliber to complete the kit. The press is large enough to handle even monster belted magnum rifle cases.

When it is time to change calibers, simply lock in a new Lee Precision 4 Hole Turret Turret with another set of dies and begin loading within seconds. The auto index on the press is capable of loading cartridges with an overall length of 2.3125" or less.

For loading longer cartridges, choose Lee's Classic Turret Press Kit which has the auto index feature with a longer stroke that is capable of loading cartridges with an overall length of 3.313" or less. For both presses anything longer than the above specs, requires the turret to be manually advanced.

INCLUDES:

• Lee Precision 4 Hole Turret Turret Press with Auto Index
• Lee Precision Auto Drum Powder Measure
• Lee Precision Safety Scale Red
• Lee Precision Primer Pocket Cleaner, cleans both large and small primer pockets
• Lee Precision Cutter & Lock Stud, for trimming your cases
• Lee Precision Chamfer Tool, deburrs cases after trimming
• Instructions

photo note:

• The Lee Turret Press is shown mounted to a Lee Bench Plate which is not included.

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

• DO NOT USE more powder than recommended
• DO NOT USE a heavier bullet than recommended
• DO NOT SEAT the bullet deeper than normal
• DO NOT USE magnum primers unless using a slow burning ball powder
• Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
• High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

• Always wear safety glasses when reloading and shooting.
• Ammunition loaded with these tools should be used in modern guns, in good condition.
• Children should not be permitted to reload ammunition without strict parental supervision.
• Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
• We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.