Name: Lee Precision 6-32X1/4 Phillips Flat Head
Brand: Lee Precision
SKU: FL3334-Disc
Price: 0.29 USD
Availability: InStock
Rating: 2.94 (160 reviews)

Result pages: 12 »
per page

Lee Precision 6-32X1/4 Phillips Flat Head

This product has been discontinued.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

Lee Precision S Pin (lng Min 1.420

Part PT1021 - 1 required for Lee Precision products

Lee Precision Pull Cord

Lee Precision Core Pin Hldr(disc)

Part BM1189 - 1 required for Lee Precision products

Lee Precision *Valve Knob

Part EM1120 - 1 required for Lee Precision products

Lee Precision Univ Shell Hldr 7B

Part SD3009 - 1 required for Lee Precision products

Lee Case Length Gauge & Shell Holder .45 Glock Automatic Pistol

This Lee Precision Case Length Gauge is the easiest way to trim .45 Glock Automatic Pistol cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shell holder helps keep everything square.

The Lee Case Length Gauge and Shell holder works in conjunction with LEE's Cutter and Lock Stud (as shown in the image below), and with the LEE Cutter with Ball Grip and /or LEE Zip Trim to produce consistently trimmed and squared cases with no guesswork and no measuring required.

If you're looking for a simple, no hassle way to quickly trim and square your cases to SAAMI standards, this is the tool for you.

Help for product 90224


Parts	Man

Lee Case Length Gauge & Shell Holder 6.5mm Remington Magnum

This product has been discontinued.

This Lee Precision Case Length Gauge is the easiest way to trim 6.5 Remington Magnum cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shellholder helps keep everything square.

The Lee Case Length Gauge and Shellholder work in conjunction with LEE's Cutter and Lock Stud (as shown in the image below), and with the LEE Cutter with Ball Grip and /or LEE Zip Trim to produce consistently trimmed and squared cases with no guesswork and no measuring required.

Help for product 90791


Parts

Lee Precision Thermostat 110V

Lee Precision Replacement 110 volt Thermostat for the Precision Melter, Production Pot and Production Pot IV.

Lee Precision Powder Through Expanding Die .38 Super- Automatic Colt Pistol

The Lee Precision .38 Super, .38 ACP (Automatic Colt Pistol) Powder Through Expanding Die has an expanded and flared case neck with a hollow plug. This allows simultaneous charging with Auto-Disk Powder Measure or Dipper. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shell holder sold separately. Every Lee 3-Die Set includes a Powder Through Expanding Die at no extra cost.

Help for product 90482


Parts

Lee Precision Powder Through Expanding Die .41 Magnum

The Lee Precision .41 Remington Magnum Powder Through Expanding Die has an expanded and flared case neck with a hollow plug. This allows simultaneous charging with Auto-Disk Powder Measure or Dipper. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shell holder sold separately. Every Lee 3-Die Set includes a Powder Through Expanding Die at no extra cost.

Help for product 90630


Parts

Lee Precision Taper Crimp Die .32 Smith & Wesson Long

No need to discard your existing dies to get a proper crimp, save your money, just add a Lee Taper Crimp Die for the final crimping operation. You can continue using your other brand dies for sizing, decapping and bullet seating and keep that extra money in your pocket or use it for other things. The Lee Precision .32 Smith & Wesson Long Taper Crimp Die overcomes crimp problems inherent in other brand crimp dies of inferior design.

Help for product 90779


Parts	Man

Lee Precision Factory Crimp Die .30-284

The Lee Precision .30-284 Factory Crimp Die with standard 7/8" by 14 trheads is packaged in a custom fit plastic storage case with complete instructions.

Lubrication is required.

Help for product 90066


Parts	Man

Lee Precision Heater Coil 500W 110V

Lee Precision Replacement 110 volt Heater Coil for the Precision Melter, Production Pot and Production Pot IV.

Lee Precision Steel Bench Block

Part LS1956 - 1 required for Lee Precision products

Lee Precision Carbide Sizing Die Only .41 Magnum

Lee Precision Carbide Sizing Dies use a solid carbide sizer ring which has been ground and polished with diamond wheels to eliminate the need for case lubrication. They leave no belt mark and they will never wear out. The decapper is strong enough to decap military cases with crimped primers.

Help for product 90629


Parts

Lee Precision SH/BP PRESS 50BMG

The Lee Precision Large 50 BMG Series Shell Holder is used for the Classic Cast Press. It screws into the Press Ram, making it solid and secure.

This product is also known as 90903

Help for product 90903


Parts	Man

Lee Precision Pacesetter 2-Die Set 7mm Ultra Mag

Lee Precision Pacesetter 2-Die Set 7x64 Brenneke

Lee Precision Collet 2-Die Set 6mm PPC

There is no loading system that will load more accurate ammunition than the Lee Precision 6mm PPC (Palmisano & Pindel) Collet 2-Die Set. The Collet Die squeezes the case neck against a precision mandrel for a perfect bullet fit, with minimum run-out. No case lube is needed. Maximum accuracy is usually achieved by seating the bullet out far enough to touch or almost touching the rifle with the Bullet Seating Die. This provides the shot start pressure, normally supplied by the crimp.

Not recommended for Autoloaders, Slide or Lever Action Guns.

Help for product 90802


Parts	Man

Description	SKU	MSRP	Price	Qty
Lee Precision Pull Cord	CT3072	~~1.00~~	0.99
Lee Precision Larg Pin (prime Tool	PT1020	~~0.50~~	0.39	Notify me when in stock
Lee Precision Steel Bench Block	LS1956	~~14.00~~	13.99
Lee Precision Univ Shell Hldr 7B	SD3009-Disc	~~3.98~~	3.39
Lee Precision *Valve Knob	EM1120	~~2.00~~	1.99
Tipton Applicator Brushes, Package of 12	806270	~~7.99~~	5.79
Lee Precision Small Tray Assembly	PT2965A	~~6.75~~	6.69	Notify me when in stock
Lee Precision Spring Primers/Old-style	PT1022	~~0.50~~	0.39	Notify me when in stock
Lee Precision LA Cover FOR HOP	LA1055A	~~2.00~~	1.99	Notify me when in stock
Lee Precision S Pin (lng Min 1.420	PT1021	~~0.50~~	0.39
Lee Precision Drilled Wood Base	LS1867	~~6.50~~	6.49	Notify me when in stock
Lee Precision Bushing 1 1/2	LA1057W	~~1.50~~	9.89	Notify me when in stock
Lee Precision ACS609590 .029 (disc	PP2422	~~0.50~~	0.49	Notify me when in stock
Lee Precision Core Pin Hldr(disc)	BM1189	~~1.50~~	1.29

Guest Book

Blog Home

Catalogs

Product Warranties

Newbies Guide

About Us

Policies

News

Clearance

Bestsellers

Products

Customer Service

Quick Links

Product Support

Terms of Use