NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Pacesetter 4-Die Set .450 Bushmaster

The Lee Precision .450 Bushmaster Pacesetter 4-Die Set is perfect for the beginning or experienced reloader. The set is made of steel and includes a Full Length Sizing Die which produces ammunition to factory-new specifications, using cases fired in other guns. The Powder Through Expanding Die charges the case while expanding the case mouth. The Bullet Seating & Feed Die works with almost any point style bullet and a simple finger adjustment is all that is needed to adjust the seating depth. The Factory Crimp Die will crimp the bullet in place more firmly than any other tool.

 INCLUDES:

  • Full Length Sizing Die, (Needs lubrication)
  • Powder Through Expanding Die 
  • Universal Shell Holder
  • Factory Crimp Die
  • Bullet Seating Die
  • Powder Dipper
  • Instructions
  • Storage Box

FEATURES:

  • Made of Steel
  • Produces ammunition fired in other guns, to factory-new specifications with the Full Length Sizer
  • Crimps bullet firmly in place with the Factory Crimp Die

NOTES:

PHOTO NOTE:

Load Data and Dipper are for illustration purposes and NOT included with this set.

     IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets ro cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.

Help for product 90182
Parts

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


 

Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Prop 65: Warning: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Write a review

Logged in customers receive 20 reward points for posting a valid product review. See the Customer Rewards Program for details.
Note: HTML is not translated!
    Bad           Good

Lee Precision Pacesetter 4-Die Set .450 Bushmaster

Brand: Lee Precision
Product Code: 90182
Reward Points: 33
Only Ships to: Selected Countries
Availability: Out Of Stock - Backorder OK

MSRP: $57.98
MPN: 90182
Material: Steel
Condition: New
Country of Origin: United States
Package Quantity: 1
UPC: 7343079018204
Shipping Restrictions: No
Carrier Restrictions: No
DOT Regulated: No
Calibers: .450 Bushmaster
Language: Engllish

  • $32.79

  • Price in reward points: 1968
Expected in stock:17 Jan 2022
Backorder deposit:100%

This product is currently out-of-stock:

  • You may click on the Backorder button to order and pay for the product now.
    Please be aware:
    Orders that contain out-of-stock products will be held and shipped when all out-of-stock products in that order arrive back in stock.
    To avoid delaying shipment of in-stock products, submit separate orders for in-stock and out-of-stock products.
  • If you prefer to wait and be notified when the product is back in stock, enter your desired quantity and your email address in the boxes below then press enter.
    We will send you email when the product arrives back in-stock.
    There is no charge for this email notification service.
  • Please note:
    Expected in-stock date is our best estimate based on information available to us today. There are many things beyond our control that can affect actual delivery dates.
    Backorder deposit is the portion of the product price required to order this out of stock product today.
Help for product 90182
Parts

Related Products

Hornady Shell Holder #1 (22-250 Remington, 308 Winchester, 30-06 Springfield)

Hornady Shell Holder #1 (22-250 Remington, 308 Winchester, 30-06 Springfield)

Hornady Shell Holder #1 is precision machined from solid steel then heat treated to perform flawles..

Read more...

$7.99

Lee Precision Factory Crimp Die .450 Bushmaster

Lee Precision Factory Crimp Die .450 Bushmaster

The Lee Precision .450 Bushmaster Factory Crimp Die with standard 7/8" by 14 threads is packaged i..

Read more...

$11.99

Tags: lee, precision, factory, crimp, die, .450, bushmaster, dies

Also Bought

Lee Precision Auto Prime Shell Holder #15

The Lee Precision Shell Holder #15 fits .25 ACP, .25 Automatic Colt Pistol, 6.35x16mmSR and FN 5.7x2..

Read more...

$2.99

Lee Precision Deluxe Cutter Assembly

The Lee Precision Deluxe Cutter Assembly can be used to update the Lee Value Trim to chamfer an..

Read more...

$10.19

Lyman 50th Edition Reloading Handbook- Softcover

For more than a century, the Ideal and then Lyman reloading handbooks have been the reloaders core..

Read more...

$24.99

Lee Precision Auto Prime Shell Holder #16

The Lee Precision Shell Holder #16 fits .500 S&W Magnum, 12.7x41mmSR, 7.62x54mmR, 7.62x54 Russia..

Read more...

$2.99