NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Mold Double Cavity 358-140-SWC

This Lee Precision Double Cavity Bullet Mold produces .358 diameter, 140 Wad Cutter nose bullets. Suitable for .38 Special, .357 Magnum. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel.

Includes Handles

All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing

 

  WARNING:  Melting lead and casting lead objects will expose you and others in the area to lead which  is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing  Exposure supplied with product.

This Lee Precision Double Cavity Bullet Mold produces .358 diameter, 140 Wad Cutter nose bullets. Suitable for .38 Special, .357 Magnum. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.

Handles and sprue plate are included. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.

 

INCLUDES:

  • Hardwood handles
  • Hard anodized sprue plate
  • Two Aluminum mold block halves

FEATURES:

  • Produces a bullet that fits .38 Special, .357 Magnum
  • Bullet diameter: .358 inches
  • Bullet weight: 140 grains (with Lee's suggested alloy)
  • Bullet overall length: N/A
  • Distance from nose to first lube groove: N/A
  • Bullet shape: Wad Cutter nose 
  • Ballistic Coefficient: N/A
  • 2 bullets are produced with each casting.
  • Mold block halves are CNC machined from aluminum for exacting precision.
  • A tangential cutoff helps reduce the nip at cutoff.

NOTES:

Lead Information:

  • The following lead information is from the Lee Precision Modern Reloading 2nd Edition Book, Pages 119 & 120.
  • For best results, bullet strength must be matched to breech pressure.
  • Black Powder guns require Pure Lead.
  • Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.
  • Lead with some wheel weights used for high pressure handguns.
  • Use Wheel Weights for very light rifle loads. 
  • High Pressure Rifle loads use Linotype.
  • Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.

  WARNING:  Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. 

                            USE STRONG VENTILATION

Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.

    IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.

 

 



Help for product 90318
PartsManVideo

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


Prop 65: Warning: for the melters and bullet molds: WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Mold Double Cavity 358-140-SWC

  • Brand: Lee Precision
  • Product Code: 90318
  • Reward Points: 19
  • Only Ships to: USA & Select Other Countries
  • Availability: In Stock

  • MSRP: $26.98
  • MPN: 90318
  • Material: Aluminum/Steel/Wood
  • Color: Aluminum/Black/Wood
  • Condition: new
  • Country of Origin: United States
  • Package Quantity: 1
  • Product Weight: 0.9 lbs
  • UPC: 734307903183
  • Status: New
  • Shipping Restrictions: No
  • Carrier Restrictions: No
  • DOT Regulated: No
  • Calibers: 38 Special, 38 S&W, 38 Colt New Police, 357 mag, etc.
  • Bullet Type: SemiWad Cutter
  • Bullet Weight: 140 grain
  • Bullet Length: .643 inches
  • Bullet Diameter: .358 inches
  • Nose to Crimp Groove: .295 inches

  • $18.29
  • $16.43

  • Price in reward points: 1098
Help for product 90318
Parts Manual Video

Related Products

Lee Precision PRO 4 20LB

Lee Precision PRO 4 20LB

The Lee Precision Pro 4-20, 110 Volt with the Infinite Heat Control, is mounted away from the high h..

Read more...

$67.99

Lee Precision Ingot Mold

Lee Precision Ingot Mold

Lee Precision Ingot Mold, made of rustproof aluminum mold casts 1/2 and 1 lb. ingots (2 of each). Pe..

Read more...

$9.94 $11.79

Lee Precision Mold 6 Cavity 358-140-SWC

Lee Precision Mold 6 Cavity 358-140-SWC

Six Cavity Commercial Quality MoldsMade for heavy duty volume production, this Lee Precision Six Ca..

Read more...

$36.79

Lee Precision Production Pot IV 220 V

Lee Precision Production Pot IV 220 V

Lee Precision Export Model, 220 Volt with the Infinite Heat Control, is mounted away from the high h..

Read more...

$55.10 $59.99

Lee Precision Magnum Melter

Lee Precision Magnum Melter

The Lee Precision Magnum Melter 110 Volt features an Infinite Heat Control mounted away from the hig..

Read more...

$57.99

Lee Precision Mold Mallet

Lee Precision Mold Mallet

Features a heavy hardwood construction utilizing the same wood species baseball bats are made from. ..

Read more...

$7.49

Lee Precision Bullet Lube and Size Kit .358

Lee Precision Bullet Lube and Size Kit .358

The Lee Precision .358 Lube & Sizing Kit is the fastest and easiest way to lubricate and size cast b..

Read more...

$19.29

Tags: lee, precision, mold, double, cavity, 358-140-swc, .38, special, s&w, colt, new, police, .357, mag

Also Bought

Lee Precision Mold Double Cavity 356-125-2R

This Lee Precision Double Cavity Bullet Mold produces .356 diameter 125 grain round nose bullets su..

Read more...

$18.29

Lee Precision 4 Hole Turret

Lee Precision Aluminum 4-hole Turret for quick caliber change for the 4-Hole Turret Press and Classi..

Read more...

$10.59

Lee Precision Mold Double Cavity 358-105-SWC

This Lee Precision Double Cavity Bullet Mold produces .358 diameter 105 grain Semi Wad Cutter nose b..

Read more...

$18.29

Lee Precision Under-Size Mandrel .241

When delivered from the factory, the collet die will grip the bullet with a light press fit with cas..

Read more...

$3.99

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments