LEE LOAD MASTER

The finest reloader made!

A massive press with advanced features. The ram is 1 3/4 inches in diameter. Stroke and clearance sufficient for the largest magnum rifle cases.

Loads rifle and pistol rounds with equal ease.

Load progressively or singly without spilled powder or components.

Five stations so you can Factory Crimp and post size.

Accepts all popular brands of dies (7/8 x 14).

Automatic indexing with a wedge lock mechanism that will actually hold a ton.

Positive and foolproof priming system that is easy and fast to fill.

Removable turrets. Change calibers in seconds.

Automatic 4 tube case feeder (Pistol calibers).

Loaded round ejector and case catcher.

Quick change shell plate. No tools required.

Grease and oil fittings along with hard chrome plated ram insure a lifetime of service for even the commercial reloader.

Easy to empty primer catcher guaranteed to catch every primer.

Note: The Lee Precision Load Master pictured at right is shown with the optional Case Collator which is sold separately.

Collator

Fills all four tubes in just ten seconds. For the Pro 1000 or Load Master

THIS IS A MUST HAVE ITEM WHEN YOU ORDER THE PRO 1000 OR LOADMASTER......

Precision 5-Hole Turret

Pictured at right with optional dies and installed on a Load Master press. With 20 locking lugs, it takes just seconds to change. Order a turret for each caliber you load.

Load Master & Pro 1000 difference

The Main difference between the Load Master and the Pro-1000 is that the Load Master is designed to handle rifle and pistol, and the Pro 1000 is designed primarily for pistol cartridges, but will reload rifle cartridges up to 2 5/16" in overall length.

The Load Master is a five station press, the Pro 1000 is three. Both include automatic indexing, automatic primer feed and case feed, and both can be fitted with an automatic bullet feed. Both come set up with everything you need to start loading the caliber chosen. People who wish to load rifle or use the Lee Precision Carbide Factory Crimp dies for handgun loading opt for the Load Master.

Caliber changer overs for both presses can be done in less than five minutes. The Load Master is a little more costly to purchase and to change calibers. Both presses are designed for experienced reloaders. That is not to say that a first time reloader shouldnt order one, but one should have good mechanical aptitude to start with a progressive.

This press will convince you that Lee Precision is the quality leader. Every part of this tool was designed to be strong, long lasting, rust-resistant and user friendly. This machine is designed for a life-time of the hardest use.

FOR CASE FEEDER AND TUBES GO TO THE LEE PRO 1000 PAGE

Lee Precision Load Master Progressive Press Primer Explosion Deflector

The Lee Precision Load Master Explosion Shield is necessary if using primers other than CCI or Winchester.
Used on the Load Master Press only. Material: Steel Includes: 2 Self Tapping Screws

Shell Plate

Check shell holder chart on Priming Tools page for further listings.

PISTOL CALIBERS  

READY TO LOAD PISTOL CALIBERS are equipped with carbide dies, Pro Auto-Disk Powder Measure and a case feeder.

Note: The optional Case Collater is sold separately.

RIFLE CALIBERS

READY TO LOAD RIFLE CALIBERS are equipped with Lee Precision Pace-Setter dies, Perfect Powder Measure, Universal Charge Die and case inserter.

Note: The optional Case Collater is sold separately.

Primer Feeder

Bullet Feed Kit

The bullet feeder designed to directly fit the Pro 1000 and Load Master. Automatically feeds bullets into the mouth of the seating die. Align bullets more accurately than possible by hand. Increases the cyclic rate 50 to 100%. The Bullet Feed Kit is complete for one bullet diameter and range of length. To convert to another caliber or bullet length select appropriate Feed die & finger. Order from chart below.

Feed Kits Complete

Feed Die and Fingers