Lee Precision Production Pot IV 110 V

Lee Precision Production Pot IV, 110 Volt with the Infinite Heat Control, is mounted away from the high heat of the pot. This eliminates failures associated with thermostatically controlled units. Thermal feed back to the Infinite Control permits heater to put out full power until metal has melted. Large, deep pot holds approximately 10 pounds of lead.

Melt time is less than 20 minutes. Pour spout is up front so you can see what you're doing. Uses only 500 watts of power during heat-up and a lot less to maintain temperature. Large, stable base for safety. 4" of clearance under the spout is high enough to accept all brands of bullet molds and most sinker molds.

Melter is capable of reaching 900 degrees Fahrenheit.


  • Capacity: 10 Pound
  • Voltage: 110 Volt
  • Pot Diameter: 4"
  • Wattage: 500
  • Melt Time: Approx. 20 minutes
  • Function: Designed for melting and blending lead alloys for bullet casting
  • Infinite Heat Control eliminates thermal feed back
  • Adjustable flow valve
  • Melter is capable of reaching 900 degrees Fahrenheit

Lead Information:

  • The following lead information is from the Lee Precision Modern Reloading 2nd Edition Book, Pages 119 & 120.
  • For best results, bullet strength must be matched to breech pressure.
  • Black Powder guns require Pure Lead.
  • Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.
  • Lead with some wheel weights used for high pressure handguns.
  • Use Wheel Weights for very light rifle loads.
  • High Pressure Rifle loads use Linotype.
  • Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.

WARNINGWARNING: Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.


Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.

Help for product 90009
Parts Manual Video


We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.

Prop 65: Warning: for the melters and bullet molds: WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to See instructions on Reducing Exposure supplied with product.

Write a review

Logged in customers receive 20 reward points for posting a valid product review. See the Customer Rewards Program for details.
Note: HTML is not translated!
    Bad           Good

Lee Precision Production Pot IV 110 V

Brand: Lee Precision
Product Code: 90009
Reward Points: 60
Only Ships to: Selected Countries
Availability: Out Of Stock - Backorder OK

MSRP: $87.98
MPN: 90009
Condition: new
Country of Origin: United States
Package Quantity: 1
Product Weight: 3.5 lbs
UPC: 7343079000902
Shipping Restrictions: No
Carrier Restrictions: No
DOT Regulated: No
Language: Engllish

  • $59.99

  • Price in reward points: 3600
Expected in stock:13 Oct 2020
Expected quantity:1
Backorder deposit:100%

This product is currently out-of-stock:

  • You may click on the Backorder button to order and pay for the product now.
    Please be aware:
    Orders that contain out-of-stock products will be held and shipped when all out-of-stock products in that order arrive back in stock.
    To avoid delaying shipment of in-stock products, submit separate orders for in-stock and out-of-stock products.
  • If you prefer to wait and be notified when the product is back in stock, enter your desired quantity and your email address in the boxes below then press enter.
    We will send you email when the product arrives back in-stock.
    There is no charge for this email notification service.
  • Please note:
    Expected in-stock date is our best estimate based on information available to us today. There are many things beyond our control that can affect actual delivery dates.
    Backorder deposit is the portion of the product price required to order this out of stock product today.

Help for product 90009
Parts Manual Video

Related Products

Lee Precision PRO 4 20LB 220V

Lee Precision PRO 4 20LB 220V

The Lee Precision Pro 4-20, 220 Volt with the Infinite Heat Control is mounted away from the high he..



Frankford Arsenal CleanCast Lead Flux - 1 lb

Frankford Arsenal CleanCast Lead Flux - 1 lb

Perform lead fluxing the easy way. Use Frankford Arsenal 1# CleanCast Lead Fluxing Compound&nbs..



Lyman Digital Lead Thermometer

Lyman Digital Lead Thermometer

The Lyman Digital Lead Thermometer is a fast and accurate way to check the temperature of your casti..



Tags: lyman, digital, lead, thermometer, bullet, casting accessories

Also Bought

Lee Precision Lead Ladle

Lee Lead Ladle for bullet casting, handy for skimming and stirring metal. WARNING: Melting lead and ..



Lee Precision Ingot Mold

Lee Precision Ingot Mold, made of rustproof aluminum mold casts 1/2 and 1 lb. ingots (2 of each). Pe..



Lee Precision Liquid Alox

The 4 oz. bottle of Lee Precision Liquid Alox gives better accuracy because it eliminates leading. ..



Lee Precision Under-Size Mandrel .241

When delivered from the factory, the collet die will grip the bullet with a light press fit with cas..