NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Pacesetter 2-Die Set FN 5.7x28mm

The Lee Precision 5.7x28mm FN Herstal PaceSetter 2-Die Set, Very Limited Production is a small caliber, high velocity cartidge. It is a bottlenecked centerfire cartridge that is somewhat similar to the .22 Hornet. Bullet Diameter .224", 5.69mm. Maximum Overall Length 1.594", 40.49mm. Includes a Full Length Sizer that allows you to restore any case to factory original dimensions. So you can fire form in your gun. Also includes a Bullet Seating Die, that works with nearly any point style bullet and has a simple finger adjustable seating depth. Tapered on end for use with automatic bullet feeders. Powder Dipper in picture is for illustration purposes only. It is NOT included in this set.

Lee Precision guarantees no other brand of full length sizing dies will load ammunition with less bullet runout than Lee Rifle Dies.

INCLUDES:

  • Full Length Sizing Die
  • Bullet Seating Die
  • Universal Shell Holder
  • Instructions/Load Data

Notes:

  • Speer advises that Speer bullets should not be used with certain Lee Dies. All other brands work great!
  • If for any reason you do not use the Lee Resizing Lubricant, be very careful not to contaminate the powder or primers. Other brands are oil base and have serious, detrimental effects on powder & primers. Because of the stickiness, they also attract grit that can damage the die.

Photo Note:

Powder Dipper in picture is for illustration purposes only. It is NOT included in this set

Caution:

  • If your using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die
  • Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is Extremely Important that full wadcutter bullets be used with light loads ONLY. You can select these by their reduced velocity.

? IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.

?

Help for product 90603
Parts Manual

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Prop 65: Warning: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Write a review

Logged in customers receive 50 reward points for posting an approved review.
See the FS Reloading Customer Rewards Program for details.
Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Pacesetter 2-Die Set FN 5.7x28mm

Brand: Lee Precision
Product Code: 90603
Reward Points: 33
Only Ships to: USA & Select Other Countries
Availability: Out-Of-Stock

MSRP: $46.98
MPN: 90603
Condition: new
Country of Origin: United States
Package Quantity: 1
Product Weight: 0.9 lbs
UPC: 734307906030
Calibers: FN 5.7x28

  • $32.79

  • Price in reward points: 1968
Expected in stock:19 Jul 2019
Preorder deposit:100%

This product is currently out-of-stock:

  • You may click on the Preorder button to order and pay for the product now.
    Please be aware:
    Orders that contain out-of-stock products will be held and shipped when all out-of-stock products in that order arrive back in stock.
    To avoid delaying shipment of in-stock products, submit separate orders for in-stock and out-of-stock products.
  • If you prefer to wait and be notified when the product is back in stock, enter your desired quantity and your email address in the boxes below then press enter.
    We will send you email when the product arrives back in-stock.
    There is no charge for this email notification service.
  • Please note:
    Expected in-stock date is our best estimate based on information available to us today. There are many things beyond our control that can affect actual delivery dates.
    Preorder deposit is the portion of the product price required to order this out of stock product today.

Help for product 90603
Parts Manual

Related Products

Lee Precision Shell Holder R15 (5.7x28mm FN, .25 ACP)

Lee Precision Shell Holder R15 (5.7x28mm FN, .25 ACP)

The Lee Precision R15 Universal Shell Holder fits .25 ACP, .25 Automatic Colt Pistol, 6.35x16mmSR an..

Read more...

$4.39

Lee Precision Large Series 2-Die Set .416 Barrett

Lee Precision Large Series 2-Die Set .416 Barrett

The Lee Precision Large Series (1 1/4x12 thread) 2-Die set for ..416 Barrett. Very Limited Productio..

Read more...

$84.49

Lee Precision Pacesetter 3-Die Set .45-75 Government (Discontinued)

Lee Precision Pacesetter 3-Die Set .45-75 Government (Discontinued)

The Lee Precision .45-75 WCF (Winchester Center Fire) PaceSetter 3-Die Set. Very Limited Product..

Read more...

$32.79

Lee Precision Pacesetter 2-Die Set 6.5-300 Winchester Short Magnum

Lee Precision Pacesetter 2-Die Set 6.5-300 Winchester Short Magnum

The Lee Precision 6.5-.300 WSM (Winchester Short Magnum) PaceSetter 2-Die Set. Very Limited Produc..

Read more...

$32.79

Lee Precision Pacesetter 2-Die Set .30-30 Ackley Improved

Lee Precision Pacesetter 2-Die Set .30-30 Ackley Improved

The Lee Precision .30-30 Winchester Ackley Improved 40- Degree Shoulder PaceSetter 2-Die Set. Ve..

Read more...

$32.79

Lee Precision Pacesetter 3-Die Set .257 Ackley Improved

Lee Precision Pacesetter 3-Die Set .257 Ackley Improved

The Lee Precision .257 Roberts Ackley Improved 40-Degree Shoulder PaceSetter 3-Die Set. Very Lim..

Read more...

$32.79

Lee Precision Large Series 2-Die Set .50 BMG

Lee Precision Large Series 2-Die Set .50 BMG

The Lee Precision Large Series (1 1/4x12 thread) 2-Die set for 50 BMG. Includes a Full Length Sizer ..

Read more...

$84.49

Lee Precision Quick Trim Die FN 5.7x28mm Special Order

Lee Precision Quick Trim Die FN 5.7x28mm Special Order

The Lee Precision FN 5.7x28mm Special Order Quick Trim Rifle Die is used in conjunction with the ..

Read more...

$9.53 $11.49

Hornady Shell Holder #37 (5.7x28mm FN, .25 ACP)

Hornady Shell Holder #37 (5.7x28mm FN, .25 ACP)

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessl..

Read more...

$4.99

Tags: hornady, shell, holder, #37, holders (5.7x28mm, fn, , .25, acp) presses

Also Bought

Lee Precision Case Length Gauge & Shell Holder 5.7X28mm FN

This Lee Precision Case Length Gauge is the easiest way to trim 5.7x28mm FN cases to the proper leng..

Read more...

$4.35 $5.19

Lee Precision Auto Prime Shell Holder #15

The Lee Precision Shell Holder #15 fits .25 ACP, .25 Automatic Colt Pistol, 6.35x16mmSR and FN 5.7x2..

Read more...

$2.89

Lee Precision EZ X Expander FN 5.7x28mm

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair pa..

Read more...

$3.49

Lee Precision 5 Hole Turret

Lee Precision Aluminum 5-hole Turret with 20 locking lugs. Takes seconds to change on the Lee Load M..

Read more...

$18.49