NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Carbide 3-Die Set .38 Automatic Colt Pistol/.38 Super

Lee Precision Carbide .38 ACP (Automatic Colt Pistol), .38 Super 3-Die Pistol Set uses a solid carbide insert ground to a special contour that does not leave the objectional belt mark on the cases, common to the ordinary carbide dies. A Carbide Full Length Sizing Die is a must if you are reloading for more than one firearm or reloading cases that were fired in other firearms. No case lube is needed, and you don't have to clean your cases.

Taper crimp dies are used to correct problems caused by the improper expanding plug design or adjustment. They distort the bullet shank and reduce accuracy. The Powder Thru Expanding Die charges the case while expanding the mouth. All of the flare is removed with the Bullet Seating Die. Thus eliminating the need for a tapered crimp die.

Includes:

  • Carbide Full Length Sizing Die (shown in image at the right)Lee Precision Carbide Sizing Die Cutaway
  • Bullet Seating Die
  • Powder Thru Expanding Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions
  • Load Data

NOTES:

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.
Help for product 90623
Parts Manual

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Prop 65: Warning: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Carbide 3-Die Set .38 Automatic Colt Pistol/.38 Super

Brand: Lee Precision
Product Code: 90623
Reward Points: 30
Only Ships to: USA & Select Other Countries
Availability: In Stock

MSRP: $42.98
MPN: 90623
Material: Steel
Condition: new
Country of Origin: United States
Package Quantity: 1
Product Weight: 1.3 lbs
UPC: 734307906238
Shipping Restrictions: No
Carrier Restrictions: No
DOT Regulated: No
Calibers: .38 ACP, .38 Super, 9mm Largo

  • $29.49

  • Price in reward points: 1770
Help for product 90623
Parts Manual

Related Products

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 9x19mm Parabellum 3-Die Pistol Set uses a solid carbide insert ground to a spe..

Read more...

$29.49

Lee Precision Carbide Sizing Die .38 ACP / .38 Super

Lee Precision Carbide Sizing Die .38 ACP / .38 Super

Lee Precision Carbide Sizing Dies use a solid carbide sizer ring which has been ground and pol..

Read more...

$21.99

Lee Precision Powder Through Expanding Die .38 Super- Automatic Colt Pistol (Discontinued)

Lee Precision Powder Through Expanding Die .38 Super- Automatic Colt Pistol (Discontinued)

The Lee Precision .38 Super, .38 ACP (Automatic Colt Pistol) Powder Through Expanding Die has an ex..

Read more...

$10.79

Lee Precision Case Length Gauge & Shell Holder .38 Super

Lee Precision Case Length Gauge & Shell Holder .38 Super

This Lee Precision Case Length Gauge is the easiest way to trim .38 Super and .38 Super Automatic ..

Read more...

$5.19

Lee Precision Carbide Factory Crimp Die .38 Super

Lee Precision Carbide Factory Crimp Die .38 Super

Save time and money while producing more consistent, dependable and accurate ammo with the Lee Preci..

Read more...

$15.35 $18.29

Lee Precision Shell Holder R19

Lee Precision Shell Holder R19

The Lee Precision R19 Universal Shell Holder fits .30 Luger, 7.65 21mm Parabellum, 7.65mm Luger, .30..

Read more...

$4.39

Tags: lee, precision, r19, shell, holder, presses

Also Bought

Lee Precision Carbide Factory Crimp Die .38 Super

Save time and money while producing more consistent, dependable and accurate ammo with the Lee Preci..

Read more...

$15.35 $18.29

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 9x19mm Parabellum 3-Die Pistol Set uses a solid carbide insert ground to a spe..

Read more...

$29.49

Lee Precision Case Length Gauge & Shell Holder .38 Super

This Lee Precision Case Length Gauge is the easiest way to trim .38 Super and .38 Super Automatic ..

Read more...

$5.19

Lee Precision Resizing Lubricant

Lee Precision Resizing Lubricant is perfect for sizing cartridge cases. Non-stick, water soluable w..

Read more...

$3.89