NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Mold Double Cavity Ball 390

Lee Precision Double Cavity Round Ball Mold produces a .390 diameter ball, 89.05 grains. Most reloaders find working with cast iron blocks difficult. The Lee Bullet mold makes casting bullets fast and easy, and have tangential cut off which eliminates the objectional nib at the sprue. No more casting several bad bullets to get your first good one. By following the simple instructions, your first pour will be good in most cases. Includes handles and Sprue Plate.


                                   PURE LEAD SHOULD BE USED 

INCLUDES:

  • Hardwood handles
  • Hard anodized sprue plate
  • Two Aluminum mold block halves
  • Instructions

NOTES:

Lead Information:

  • The following lead information is from the Lee Precision Modern Reloading 2nd Edition Book, Pages 119 & 120.
  • For best results, bullet strength must be matched to breech pressure.
  • Black Powder guns require Pure Lead.
  • Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.
  • Lead with some wheel weights used for high pressure handguns.
  • Use Wheel Weights for very light rifle loads. 
  • High Pressure Rifle loads use Linotype.
  • Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.

  WARNING:  Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. 

                            USE STRONG VENTILATION

Lead contamination in the air, dust and on your skin is invisible. Keep children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated, with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.

    IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.


Help for product 90424
PartsManVideo

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Mold Double Cavity Ball 390

 Brand:  Lee Precision 
 Product Code:  90424 
 Reward Points:  20 
 Availability:  In Stock 
 MSRP:  $26.98 
 MPN:  90424 
 Condition:  new 
 Country of Origin:  United States 
 Package Quantity: 
 Product Weight:  0.9 lbs 
 UPC:  734307904241 
 Shipping Restrictions:  No 
 Carrier Restrictions:  No 
 DOT Regulated:  No 
 Calibers:  .390 Round Ball 

  • $19.49

  • Price in reward points: 1170

Help for product 90424
Parts Manual Video

Tags: lee, precision, mold, double, cavity, 390, ball, round

Customers Who Bought This Item Also Bought

Lee Precision Mold Double Cavity 395 Ball

Lee Precision Double Cavity Round Ball Mold produces a .395 diameter ball, 92.52 grains. Most reload..

$19.49

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.