NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision PRO 4 20LB 220V

The Lee Precision Pro 4-20, 220 Volt with the Infinite Heat Control is mounted away from the high heat of the pot. This eliminates failures associated with thermostatically controlled units. Thermal feed back to the Infinite Control permits heater to put out full power until metal has melted. Large diameter high capacity pot, holds approximately 20 pounds of lead. A generous 4 inches of clearance under the spout accepts all brands of bullet molds and most sinker molds.

It also includes an adjustable mold guide to quickly and accurately position any mold for pouring. This second generation design incorporates the famous Lee patented high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. Long life 700-watt tubular heating element assures quick melting and rapid recovery. New micro adjustable, flow control valve adjusts instantly with a twist of the screw driver. Front mounted low maintenance replaceable valve spout allows instant reseating with a turn of a screwdriver.

220 Volt melting pots DOES NOT SHIP WITH A PLUG on the electric cord. Every country has a unique plug, so you will be responsible for purchasing and attaching a plug.

 

Features:

  • Capacity: 20 lbs 
  • Voltage: 220 Volt 
  • Pot Diameter: 4" 
  • Wattage: 700-Watt 
  • Melt Time: 20-30 minutes to melt lead at 600 degrees F 

Notes:

  • The convenient, bottom-pour design features a micro adjustable flow control valve which can be fine-tuned with a screwdriver. 
  • This melter will reach between 450 and 900 degrees Fahrenheit. Cast at the lowest temperature that will give good fill out. 650 degrees is a good starting point. 220 volt

Lead Information:

  • The following lead information is from the Lee Precision Modern Reloading 2nd Edition Book, Pages 119 & 120.
  • For best results, bullet strength must be matched to breech pressure.
  • Black Powder guns require Pure Lead.
  • Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.
  • Lead with some wheel weights used for high pressure handguns.
  • Use Wheel Weights for very light rifle loads. 
  • High Pressure Rifle loads use Linotype.
  • Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.

 

WARNINGWARNING: Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.

                            USE STRONG VENTILATION

Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.



Help for product 90948
PartsMan
Lead Melters
Lead Capacity 20 lbs
Voltage 220 VAC
Wattage 700
Pott Diameter 4 inch
Melt Time 20-30 minutes to melt lead at 600 degrees F
Heat Control Infinite Heat Control mounted away from the high heat of the pot.
Maximum Temperature 900 degrees Fahrenheit
Dispensing Method Adjustable flow control valve

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision PRO 4 20LB 220V

  • Brand: Lee Precision
  • Product Code: 90948
  • Reward Points: 71
  • Availability: Out Of Stock

  • MPN: 90948
  • UPC: 734307909482
  • Condition: new
  • Shipping Restrictions: No
  • Carrier Restrictions: No
  • DOT Regulated: No
  • Country of Origin: United States
  • Product Weight: 4.55 lbs
  • Package Quantity: 1
  • MSRP: $101.00

  • $70.99

  • Price in reward points: 4260

Help for product 90948
Parts Manual

Related Products

Lee Precision Commercial Mold Handles

Lee Precision Commercial Mold Handles

Lee Precision Commercial Mold Handles fits Lee 6-Cavity Molds, also most other brands of single &..

$12.49

Lee Precision Lead Ladle

Lee Precision Lead Ladle

Lee Lead Ladle for bullet casting, handy for skimming and stirring metal. WARNING: Melting lead..

$4.49

Lee Precision PRO 4 20LB

Lee Precision PRO 4 20LB

The Lee Precision Pro 4-20, 110 Volt with the Infinite Heat Control, is mounted away from ..

$67.99

Lee Precision Ingot Mold

Lee Precision Ingot Mold

Lee Precision Ingot Mold, made of rustproof aluminum mold casts 1/2 and 1 lb. ingots (2 of each). Pe..

$10.99

Lee Precision Precision Melter 220 V

Lee Precision Precision Melter 220 V

Lee Precision High Speed Melter, 220 Volt with the Infinite Heat Control, is mounted ..

$36.99

Lee Precision Lead Hardness Test Kit

Lee Precision Lead Hardness Test Kit

The Lee Precision Hardness Testing Kit will determine the exact Brinnell number of an alloy, in a si..

$59.99

Lee Precision Production Pot IV 220 V

Lee Precision Production Pot IV 220 V

Lee Precision Export Model, 220 Volt with the Infinite Heat Control, is mounted away from the high h..

$59.99

Lee Precision Magnum Melter

Lee Precision Magnum Melter

The Lee Precision Magnum Melter 110 Volt features an Infinite Heat Control mounted away from the hig..

$57.99

Lee Precision Production Pot IV 110 V

Lee Precision Production Pot IV 110 V

Lee Precision Production Pot IV, 110 Volt with the Infinite Heat Control, is mounted ..

$57.99

Lee Precision Mold Mallet

Lee Precision Mold Mallet

Features a heavy hardwood construction utilizing the same wood species baseball bats are made from. ..

$7.49

Lee Precision Thermostat 110V

Lee Precision Thermostat 110V

Lee Precision Replacement 110 volt Thermostat for the Precision Melter, Production Pot and Productio..

$9.99

Tags: lee, precision, pro, 20lb, 220v, lead, melters reloading, tools

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.