NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Deluxe Carbide 4-Die Set 9mm Luger

The Lee Precision 9mm Luger Deluxe Pistol 4-Die Set combines the world's most popular Carbide Three-die Set with the Lee Factory Crimp Die at a great price. This Lee Carbide 4-die set includes Lee's Carbide Full Length Sizing Die which has a hard diamond polished surface that eliminates the need for lubrication and will never wear out. The decapper clamp collet accurately centers the decapper in the die. The Bullet Seating Die works with the Lee Automatic Bullet Feeder. It has a 45 degree chamfer to allow for the mechanical feed fingers and improved operator clearance.

Also included, the Powder Through Expanding Die charges the case while expanding the case mouth. By separating the seating and crimping operation, Lee's Deluxe Pistol 4-Die Set provides greatly simplified adjustment. But more importantly, the Carbide Factory Crimp Die post sizes your cases thus assuring every round will chamber properly in your gun—an absolute must if you reload cases that have been fired in other guns or for use in multiple guns. This, plus all the other exclusive Lee features, make this one of the best die sets money can buy.

—No other die set at any price produces more reliable or accurate ammo—

Lee Precision Carbide Sizing Die CutawayINCLUDES:

  • Carbide Full Length Sizing Die with Decapper (shown in image at right)
  • Bullet Seating Die
  • Powder Thru Expanding Die
  • Carbide Factory Crimp Die
  • Lee's signature flat die storage box
  • Lee Universal Shellholder
  • Powder dipper
  • Instructions and Load Data Sheet

FEATURES:

  • Separate seating and crimping operations
  • Powder charges on the press through the Lee Powder Through Expanding Die
  • Post sizes cases

NOTES:

    IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.


Help for product 90963
PartsMan

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Deluxe Carbide 4-Die Set 9mm Luger

  • Brand: Lee Precision
  • Product Code: 90963
  • Reward Points: 41
  • Availability: In Stock

  • MPN: 90963
  • UPC: 734307909635
  • Condition: new
  • Calibers: 9mm Luger
  • Material: Steel
  • Shipping Restrictions: No
  • Carrier Restrictions: No
  • DOT Regulated: No
  • Country of Origin: United States
  • Product Weight: 1.55 lbs
  • Package Quantity: 1
  • MSRP: $59.98

  • $40.49

  • Price in reward points: 2430

Help for product 90963
Parts Manual

Related Products

Lee Precision Carbide Sizing Die Only 9mm Luger

Lee Precision Carbide Sizing Die Only 9mm Luger

The Lee Precision 9mm Luger Carbide Sizing Die's solid carbide sizer ring is specially ground and po..

$21.99

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 9x19mm Parabellum 3-Die Pistol Set uses a solid carbide insert groun..

$29.49

Lee Precision Case Length Gauge & Shell Holder 9mm Luger

Lee Precision Case Length Gauge & Shell Holder 9mm Luger

This Lee Precision Case Length Gauge is the easiest way to trim 9mm Luger cases to the proper length..

$5.19

Lee Precision Taper Crimp Die 9mm Luger

Lee Precision Taper Crimp Die 9mm Luger

No need to discard your existing dies to get a proper crimp, save your money, just add a Lee Taper C..

$10.79

Lee Precision Carbide Factory Crimp Die 9mm Luger

Lee Precision Carbide Factory Crimp Die 9mm Luger

Save time and money while producing more consistent, dependable and accurate ammo with the Lee Preci..

$18.29

Lee Precision R19 Shell Holder

Lee Precision R19 Shell Holder

The Lee Precision R19 Universal Shell Holder fits .30 Luger, 7.65×21mm Parabellum, 7.65mm Luger, .30..

$4.89

Lee Precision Auto Prime Shell Holder #19

Lee Precision Auto Prime Shell Holder #19

The Lee Precision Shell Holder #19 fits .30 Luger, 7.65×21mm Parabellum, 7.65mm Luger, .30 Mauser Au..

$2.89

Lee Precision Powder Through Expanding Die 9mm Luger

Lee Precision Powder Through Expanding Die 9mm Luger

The Lee Precision 9mm Luger Powder Through Expanding Die has an expanded and flared case neck with a..

$10.79

Lee Precision Quick Trim Die 9mm Makarov

Lee Precision Quick Trim Die 9mm Makarov

The Lee Precision 9mm Makarov Quick Trim Pistol Die is used in conjunction with the Lee Precision De..

$11.79

Lee Precision Carbide Factory Crimp Die 9mm Makarov

Lee Precision Carbide Factory Crimp Die 9mm Makarov

Save time and money while producing more consistent, dependable and accurate ammo with the Lee Preci..

$18.29

Tags: lee, precision, deluxe, carbide, 4-die, set, 9mm, luger, sets

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.