NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Carbide 3-Die Set .357 Magnum

Lee Precision Carbide .357 Magnum 3-Die Pistol Set uses a solid carbide insert ground to a special contour that does not leave the objectional belt mark on the cases, common to the ordinary carbide dies. A Carbide Full Length Sizing Die is a must if you are reloading for more than one firearm or reloading cases that were fired in other firearms. No case lube is needed, and you don't have to clean your cases.

Taper crimp dies are used to correct problems caused by the improper expanding plug design or adjustment. They distort the bullet shank and reduce accuracy. The Powder Thru Expanding Die charges the case while expanding the mouth. All of the flare is removed with the Bullet Seating Die. Thus eliminating the need for a tapered crimp die.

Cannot load .38 Special, please use Lee's .38 Special Carbide 3-Die Set, item #90510.

Includes:

  • Carbide Full Length Sizing Die (shown in image at the right)Lee Precision Carbide Sizing Die Cutaway
  • Bullet Seating Die
  • Powder Thru Expanding Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions
  • Load Data

NOTES:

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.
Help for product 90511
Parts Manual

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Prop 65: Warning: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Lee Precision Carbide 3-Die Set .357 Magnum

Brand: Lee Precision
Product Code: 90511
Reward Points: 30
Only Ships to: USA & Select Other Countries
Availability: Out-Of-Stock

More Available: 2019-05-1
MSRP: $42.98
MPN: 90511
Material: Steel
Condition: new
Country of Origin: United States
Package Quantity: 1
Product Weight: 1.3 lbs
UPC: 734307905118
Shipping Restrictions: No
Carrier Restrictions: No
DOT Regulated: No
Calibers: .357 Magnum, .357 Remington Maximum

  • $29.49

  • Price in reward points: 1770
Status:In transit
Expected in stock:15 Jun 2019
Preorder deposit:100%

This product is currently out-of-stock:

  • You may click on the Preorder button to order and pay for the product now.
    Please be aware:
    Orders that contain out-of-stock products will be held and shipped when all out-of-stock products in that order arrive back in stock.
    To avoid delaying shipment of in-stock products, submit separate orders for in-stock and out-of-stock products.
  • If you prefer to wait and be notified when the product is back in stock, enter your desired quantity and your email address in the boxes below then press enter.
    We will send you email when the product arrives back in-stock.
    There is no charge for this email notification service.
  • Please note:
    Expected in-stock date is our best estimate based on information available to us today. There are many things beyond our control that can affect actual delivery dates.
    Preorder deposit is the portion of the product price required to order this out of stock product today.

Help for product 90511
Parts Manual

Related Products

Lee Precision Carbide Sizing Die .38 Special / .357 Magnum

Lee Precision Carbide Sizing Die .38 Special / .357 Magnum

The Lee Precision .38 Special, .357 Magnum Carbide Sizing Die's solid carbide sizer ring is speciall..

Read more...

$21.99

Lee Precision Quick Trim Die .357 Magnum

Lee Precision Quick Trim Die .357 Magnum

The Lee Precision .357 Magnum Quick Trim Pistol Die is used in conjunction with the Lee Precision De..

Read more...

$10.98 $12.79

Lee Precision Case Length Gauge & Shell Holder .357 Magnum

Lee Precision Case Length Gauge & Shell Holder .357 Magnum

This Lee Precision Case Length Gauge is the easiest way to trim .357 Magnum cases to the proper len..

Read more...

$5.19

Lee Precision Powder Through Expanding Die .357 Magnum (Discontinued)

Lee Precision Powder Through Expanding Die .357 Magnum (Discontinued)

This product has been discountinued by the manufacturer. It has been replaced by Lee Precision 90581..

Read more...

$10.79

Lee Precision Carbide 3-Die Set .38 Special

Lee Precision Carbide 3-Die Set .38 Special

Lee Precision Carbide .38 Special, .357 Magnum 3-Die Pistol Set uses a solid carbide insert grou..

Read more...

$26.35 $29.49

Lee Precision Shell Holder R1

Lee Precision Shell Holder R1

The Lee Precision R1 Universal Shell Holder fits .22 Remington Jet, .256 Winchester Magnum, .38 Smit..

Read more...

$4.39

Lee Precision Taper Crimp Die .38 Special

Lee Precision Taper Crimp Die .38 Special

No need to discard your existing dies to get a proper crimp, save your money, just add a Lee Taper C..

Read more...

$10.89

Lee Precision Carbide Factory Crimp Die .38/.357 Magnum

Lee Precision Carbide Factory Crimp Die .38/.357 Magnum

Save time and money while producing more consistent, dependable and accurate ammo with the Lee Preci..

Read more...

$18.29

Lee Precision Bullet Seating Die .357 Magnum

Lee Precision Bullet Seating Die .357 Magnum

This is the same Lee Precision Bullet Seating Die that comes in Lee 3 and 4 die sets. It comes packa..

Read more...

$15.49

Tags: lee, precision, bullet, seating, die, only, .357, magnum

Also Bought

Lee Precision Carbide 3-Die Set 9x19mm Parabellum

Lee Precision Carbide 9x19mm Parabellum 3-Die Pistol Set uses a solid carbide insert ground to a spe..

Read more...

$29.49

Lee Precision Carbide 3-Die Set .45 ACP

Lee Precision Carbide .45 ACP (Automatic Colt Pistol) 3-Die Pistol Set uses a solid carbide insert ..

Read more...

$29.49

Lee Precision Case Length Gauge & Shell Holder .357 Magnum

This Lee Precision Case Length Gauge is the easiest way to trim .357 Magnum cases to the proper len..

Read more...

$5.19

Lee Precision Die Box Round Red

The Lee Precision Red Round Die Box, the perfect storage for your dies. Round box made of durab..

Read more...

$4.79