NEW ACCOUNTS      FORGOT PASSWORD      CONTACT US      GIFT CERTIFICATES     

Lee Precision Mold 6 Cavity C225-55-RF

Lee Six Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet suitable for .22 cal cartridges.

Handles are sold separately, order # 90005

Hornady 22 Caliber Gas Checks (sold separately) are a good fit for bullets produced by this mold.

All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface. This unique venting allows consistent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing

Gas checks not included

Six Cavity Commercial Quality Molds

Made for heavy duty volume production, this Lee Precision Six Cavity Bullet Mold produces .225 diameter, 55 grain, round nose with flat top. suitable for .218 Bee / .221 Fireball / .222 Remington / .223 and similar cartridges. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, this Lee mold is easier to use, causes less operator fatigue during casting and can produce more consistent bullets than other molds made from iron or steel. Lee's 6 cavity mold blocks are machined from aluminum and assembled with steel bushings and alignment pins for lasting precision.

A sprue plate is included but Handles are sold separately. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.


INCLUDES:

  • (2) aluminum Mold Block halves (mold handles NOT included)
  • Hard anodized Sprue Plate with handle

FEATURES:

  • Produces bullets that fit .218 Bee / .221 Fireball / .222 Remington / .223
  • Bullet diameter: .225 inches
  • Bullet weight: 55 grains (with Lee's suggested alloy)
  • Bullet overall length:
  • Distance from nose to first lube groove: .
  • Bullet shape: round nose flat top
  • Ballistic Coefficient:
  • 6 bullets are produced with each casting.
  • Mold block halves are machined from aluminum.
  • Assembled with steel bushings and alignment pins for lasting precision.
  • Cam operated sprue plate to eliminate the pounding common to ordinary molds.
  • A tangential cutoff helps reduce the nip at cutoff.

NOTES:

Lead Information:

  • The following lead information is from the Lee Precision Modern Reloading 2nd Edition Book, Pages 119 & 120.
  • For best results, bullet strength must be matched to breech pressure.
  • Black Powder guns require Pure Lead.
  • Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.
  • Lead with some wheel weights used for high pressure handguns.
  • Use Wheel Weights for very light rifle loads.
  • High Pressure Rifle loads use Linotype.
  • Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.

WARNING: Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer.

USE STRONG VENTILATION

Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

  • DO NOT USE more powder than recommended
  • DO NOT USE a heavier bullet than recommended
  • DO NOT SEAT the bullet deeper than normal
  • DO NOT USE magnum primers unless using a slow burning ball powder
  • Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
  • High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures

WARNING:

Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.

  • Always wear safety glasses when reloading and shooting.
  • Ammunition loaded with these tools should be used in modern guns, in good condition.
  • Children should not be permitted to reload ammunition without strict parental supervision.
  • Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
  • We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.

Help for product 90459
Parts

Product WARNINGS:

We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.


Prop 65: Warning: for the melters and bullet molds: WARNING: Melting and casting lead objects will expose you and others in the area to lead, which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. See instructions on Reducing Exposure supplied with product.

Write a review

Logged in customers receive 20 reward points for posting a valid product review. See the Customer Rewards Program for details.
Note: HTML is not translated!
    Bad           Good

Lee Precision Mold 6 Cavity C225-55-RF

Brand: Lee Precision
Product Code: 90459
Reward Points: 70
Only Ships to: Selected Countries
Availability: Out Of Stock - No Backorder

MSRP: 65.00
MPN: 90459
Material: Aluminum/Steel/Wood
Color: Aluminum/Black/Wood
Condition: new
Country of Origin: United States
Package Quantity: 1
Product Weight: 1.3 lbs
UPC: 7343079045934
Status: New
Shipping Restrictions: No
Carrier Restrictions: No
DOT Regulated: No
Calibers: .218 Bee / .221 Fireball / .222 Remington / .223
Case Material: Brass
Bullet Type: Round with Flat, Gas Check
Bullet Weight: 55 grain
Bullet Diameter: .225 inches
Language: Engllish

  • $69.79

  • Price in reward points: 4188
Help for product 90459
Parts

Related Products

Lee Precision Classic Bullet Sizing Kit .225

Lee Precision Classic Bullet Sizing Kit .225

The Lee Precision .225 Lube & Sizing Kit is the fastest and easiest way to lubricate and size cast ..

Read more...

$19.99

Lee Precision Mold Mallet

Lee Precision Mold Mallet

Features a heavy hardwood construction utilizing the same wood species baseball bats are made from. ..

Read more...

$7.99

Lee Precision Double Cavity Bullet Mold C225-55-RF

Lee Precision Double Cavity Bullet Mold C225-55-RF

This Lee Double Cavity Mold produces a gas checked .225 diameter 55 grain round with flat bullet sui..

Read more...

$28.49 $32.69

Hornady 25 Caliber Crimp On Gas Checks

Hornady 25 Caliber Crimp On Gas Checks

Hornady Gas Checks help increase the performance of your cast bullets. These .25 diamerter copper ga..

Read more...

$40.99

Tags: hornady, caliber, crimp, gas, checks

Also Bought

Lee Precision Commercial Mold Handles

Lee Precision Commercial Mold Handles fits Lee 6-Cavity Molds, also most other brands of single & do..

Read more...

$24.99

Lee Precision Classic Bullet Sizing Kit .225

The Lee Precision .225 Lube & Sizing Kit is the fastest and easiest way to lubricate and size cast ..

Read more...

$19.99

Frankford Arsenal CleanCast Lead Flux - 1 lb

Perform lead fluxing the easy way. Use Frankford Arsenal 1# CleanCast Lead Fluxing Compound&nbs..

Read more...

$10.25 $11.99

FS Reloading Plastic Ammo Box Small Rifle 50 Round Translucent Red

This FS Reloading brand plastic ammo box stores 50 rounds of .223 Remington and similar sized rifle ..

Read more...

$2.29 $3.29